M74HCT573B1R

Mfr. #:: M74HCT573B1R
製造商:: STMicroelectronics
描述:: Latches Octal "D" Latch
生命週期:: 製造商新產品
數據表:: M74HCT573B1R 數據表
交貨:: DHL FedEx Ups TNT EMS
支付:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:
更多信息:: M74HCT573B1R 更多信息 M74HCT573B1R Product Details

產品屬性
屬性值

製造商：: 意法半導體

產品分類：: 鎖存器

RoHS：: Y

電路數量：: 8 Circuit

邏輯類型：: D 型閂鎖

邏輯系列：: 74HC

極性：: 同相

靜態電流：: 4 uA

輸出線數：: 3 Line

高電平輸出電流：: - 6 mA

低電平輸出電流：: 32 mA

傳播延遲時間：: 36 ns at 4.5 V

電源電壓 - 最大值：: 5.5 V

電源電壓 - 最小值：: 4.5 V

最低工作溫度：: - 55 C

最高工作溫度：: + 125 C

包裝/案例：: DIP-20

打包：: 管子

功能：: 鎖存器

高度：: 2.68 mm

長度：: 25.4 mm

輸出類型：: 3-State

系列：: M74HCT573

類型：: D型

寬度：: 7.1 mm

品牌：: 意法半導體

安裝方式：: 通孔

通道數：: 8 Channels

輸入行數：: 8 Line

電源電流 - 最大值：: 4 uA

工作電源電壓：: 4.5 V to 5.5 V

產品類別：: 鎖存器

重置類型：: 無重置

出廠包裝數量：: 1

子類別：: 邏輯 IC

單位重量：: 0.088502 oz

Tags: M74HCT573, M74HCT57, M74HCT5, M74HCT, M74HC, M74H, M74

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

M74HCT573B1R 描述

***ow.cn: Latch Transparent 3-ST 8-CH D-Type 20-Pin PDIP Tube

***el Electronic: 74HCT CMOS, 74HCT573, DIP20, 5.5V - More Details

***S: French Electronic Distributor since 1988

***nell: 74HCT CMOS, 74HCT573, DIP20, 5.5V; Logic Family / Base Number: 74HCT573; Latch Type: D Type; IC Output Type: Tri State; Propagation Delay: 25ns; Output Current: 6mA; Logic Case Style: DIP; No. of Pins: 20Pins; Supply Voltage Min: 4.5V; Supply Voltage Max: 5.5V; No. of Bits: 8bit; Logic IC Family: 74HCT; Logic IC Base Number: 74573; Operating Temperature Min: -55°C; Operating Temperature Max: 125°C; Product Range: -; Automotive Qualification Standard: -; RoHS Phthalates Compliant: To Be Advised; MSL: -; SVHC: No SVHC (17-Dec-2015); Base Number: 74; IC Generic Number: 74HCT573; Logic Function Number: 573; Logic IC Base Number: 74573; Logic IC Function: Octal D-Type Transparent Latch (3-State); No. of Inputs: 1; Operating Temperature Range: -55°C to +125°C; Supply Voltage Range: 4.5V to 5.5V; Termination Type: Through Hole

***el Electronic: FAIRCHILD SEMICONDUCTOR MM74HCT373N Latch, D Type, Tri State, 30 ns, 7.2 mA, DIP, 20 Pins

***Yang: Latch Transparent 3-ST 8-CH D-Type 20-Pin PDIP W Rail - Rail/Tube

***nell: 74HCT CMOS, 74HCT373, DIP20, 5.5V; Logic Family / Base Number: 74HCT373; Latch Type: D Type; IC Output Type: Tri State; Propagation Delay: 30ns; Output Current: 7.2mA; Logic Case Style: DIP; No. of Pins: 20Pins; Supply Voltage Min: 4.5V; Supply Voltage Max: 5.5V; No. of Bits: 8bit; Logic IC Family: 74HCT; Logic IC Base Number: 74373; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: -; Automotive Qualification Standard: -; RoHS Phthalates Compliant: Yes; MSL: -; SVHC: No SVHC (15-Jan-2018); Base Number: 74; IC Generic Number: 74HCT373; Logic Function Number: 373; Logic IC Base Number: 74373; Logic IC Function: Octal D-Type Transparent Latch (3-State); No. of Inputs: 1; Operating Temperature Range: -40°C to +85°C; Supply Voltage Range: 4.5V to 5.5V; Termination Type: Through Hole

***rchild Semiconductor: The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicon-gate CMOS technology, which provides the inherent benefits of low power consumption and wide power supply range, but are LS-TTL input and output characteristic & pin-out compatible. The 3-STATE outputs are capable of driving 15 LS-TTL loads. All inputs are protected from damage due to static discharge by internal diodes to VCC and ground. When the MM74HCT373 LATCH ENABLE input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a high logic level is applied to the OUTPUT CONTROL input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The MM74HCT374 are positive edge triggered flip-flops. Data at the D inputs, meeting the setup and hold time requirements, are transferred to the Q outputs on positive going transitions of the CLOCK (CK) input. When a high logic level is applied to the OUTPUT CONTROL (OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.

***Yang: Latch Transparent 3-ST 8-CH D-Type 20-Pin PDIP W Rail - Rail/Tube

***nell: 74HCT CMOS, 74HCT573, DIP20, 5.5V; Logic Family / Base Number: 74HCT573; Latch Type: D Type; IC Output Type: Tri State; Propagation Delay: 18ns; Output Current: 7.2mA; Logic Case Style: DIP; No. of Pins: 20Pins; Supply Voltage Min: 4.5V; Supply Voltage Max: 5.5V; No. of Bits: 8bit; Logic IC Family: 74HCT; Logic IC Base Number: 74573; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: -; Automotive Qualification Standard: -; RoHS Phthalates Compliant: Yes; MSL: -; SVHC: No SVHC (15-Jan-2018); Base Number: 74; Device Marking: 74HCT573; Logic Function Number: 573; Logic IC Base Number: 74573; Logic IC Function: Octal D-Type Transparent Latch (3-State); No. of Inputs: 1; Operating Temperature Range: -40°C to +85°C; Supply Voltage Range: 4.5V to 5.5V; Termination Type: Through Hole

***rchild Semiconductor: The MM74HCT573 octal D-type latches and MM74HCT574 octal D-type flip-flop advanced silicon-gate CMOS technology, which provides the inherent benefits of low power consumption and wide power supply range, but are LS-TTL input and output characteristic and pin-out compatible. The 3-STATE outputs are capable of driving 15 LS-TTL loads. All inputs are protected from damage due to static discharge by internal diodes to VCC and ground. When the MM74HCT573 Latch Enable input is HIGH, the Q outputs will follow the D inputs. When the Latch Enable goes LOW, data at the D inputs will be retained at the outputs until Latch Enable returns HIGH again. When a high logic level is applied to the Output Control input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The MM74HCT574 are positive edge triggered flip-flops. Data at the D inputs, meeting the setup and hold time requirements, are transferred to the Q outputs on positive going transitions of the Clock (CK) input. When a high logic level is applied to the Output Control (OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.

***et: Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin PDIP W Rail

***el Electronic: FAIRCHILD SEMICONDUCTOR MM74HCT374NFlip-Flop, D, 30 ns, 50 MHz, 7.2 mA, DIP, 20 Pins

***rchild Semiconductor: The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicon-gate CMOS technology, which provides the inherent benefits of low power consumption and wide power supply range, but are LS-TTL input and output characteristic & pin-out compatible. The 3-STATE outputs are capable of driving 15 LS-TTL loads. All inputs are protected from damage due to static discharge by internal diodes to VCC and ground. When the MM74HCT373 LATCH ENABLE input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a high logic level is applied to the OUTPUT CONTROL input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The MM74HCT374 are positive edge triggered flip-flops. Data at the D inputs, meeting the setup and hold time requirements, are transferred to the Q outputs on positive going transitions of the CLOCK (CK) input. When a high logic level is applied to the OUTPUT CONTROL (OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.

***roFlash: Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin PDIP Tube

***as Instruments: High Speed CMOS Logic Octal Positive-Edge-Triggered D-Type Flip-Flops with 3-State Outputs 20-PDIP -55 to 125

***ponent Stockers USA: HCT SERIES 8-BIT DRIVER TRUE OUTPUT PDIP20

***or: BUS DRIVER, HCT SERIES, 1-FUNC,

*** Stop Electro: D Flip-Flop, HCT Series, 1-Func, Positive Edge Triggered, 8-Bit, True Output, CMOS, PDIP20

***as Instruments: High Speed CMOS Logic Octal D-Type Flip-Flop with eset 20-PDIP -55 to 125

***ical: Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin PDIP Tube

***nell: 74HCT CMOS, 74HCT273, DIP20, 5.5V; Famille Logique/ Numéro de base: 74HCT273; Type de Flip-Flop: D; Temps de propagation: 12ns; Fréquence: 50MHz; Courant, sortie: 4mA; Type de boîtier CI logique: DIP; Nombre de broches: 20Broch

***ark: 74Hct Cmos, 74Hct273, Dip20, 5.5V; Logic Family / Base Number:74Hct273; Flip-Flop Type:d; Propagation Delay:12Ns; Frequency:50Mhz; Output Current:4Ma; Logic Case Style:dip; No. Of Pins:20Pins; Trigger Type:positive Edge; Ic Output Rohs Compliant: Yes

***Yang: Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin PDIP Tube

***ark: Flip-Flop Logic IC; Logic Family:F; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; Package/Case:20-PDIP; No. of Pins:20; Operating Temperature Range:0°C to +70°C; Input Type:TTL; Leaded Process Compatible:Yes; Output Type:TTL ;RoHS Compliant: Yes

***ment14 APAC: LOGIC, OCT EDG-TRG D-TYP F-F, 20DIP; Flip-Flop Type:D; Propagation Delay:6.1ns; Frequency:100MHz; Output Current:24mA; Trigger Type:Positive Edge; IC Output Type:Tri State Non Inverted; Supply Voltage Range:4.5V to 5.5V; Logic Case Style:DIP; No. of Pins:20; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Logic IC Base Number:74574; Logic IC Family:F; Logic IC Function:Octal Edge-Triggered D-Type Flip-Flop with 3-State Outputs; Output Type:Tri State Non Inverted; Package / Case:PDIP; Supply Voltage Max:5.5V; Supply Voltage Min:4.5V; Termination Type:Through Hole

***as Instruments: This 8-bit flip-flop features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops of the SN74F574 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs will be set to the logic levels that were set up at the data (D) inputs. A buffered output enable input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components. The output enable does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. The SN74F574 is characterized for operation from 0°C to 70°C.

Market price

型號	製造商	描述	庫存	價格
M74HCT573B1R DISTI # V79:2366_17792527	STMicroelectronics	Latch Transparent 3-ST 8-CH D-Type 20-Pin PDIP Tube RoHS: Compliant	460	100:$0.4542 25:$0.5169 10:$0.6894 1:$0.8213
M74HCT573B1R DISTI # 497-1917-5-ND	STMicroelectronics	IC LATCH OCTAL D-TYPE 20-DIP RoHS: Compliant Min Qty: 2000 Container: Tube	Limited Supply - Call
M74HCT573B1R DISTI # 26117877	STMicroelectronics	Latch Transparent 3-ST 8-CH D-Type 20-Pin PDIP Tube RoHS: Compliant	460	29:$0.8213
M74HCT573B1R DISTI # 511-M74HCT573	STMicroelectronics	Latches Octal "D" Latch RoHS: Compliant	0
M74HCT573B1R DISTI # 1094314	STMicroelectronics	74HCT CMOS, 74HCT573, DIP20, 5.5V RoHS: Compliant	0	500:$0.3870 250:$0.4050 100:$0.4730 25:$0.6080 10:$1.0600 1:$1.4200

相關產品

圖片	型號	描述
	Mfr.#: M74HCT74TTR OMO.#: OMO-M74HCT74TTR-STMICROELECTRONICS	IC FF D-TYPE DUAL 1BIT 14TSSOP
	Mfr.#: M74HCT00P OMO.#: OMO-M74HCT00P-1190	全新原裝
	Mfr.#: M74HCT02RM13 OMO.#: OMO-M74HCT02RM13-1190	全新原裝
	Mfr.#: M74HCT132MTR OMO.#: OMO-M74HCT132MTR-1190	全新原裝
	Mfr.#: M74HCT652M1R OMO.#: OMO-M74HCT652M1R-1190	全新原裝
	Mfr.#: M74HCT688M1R OMO.#: OMO-M74HCT688M1R-1190	全新原裝
	Mfr.#: M74HCT688RM13TR SOP7.2 OMO.#: OMO-M74HCT688RM13TR-SOP7-2-1190	全新原裝
	Mfr.#: M74HCT273B1R OMO.#: OMO-M74HCT273B1R-STMICROELECTRONICS	IC FF D-TYPE SNGL 8BIT 20DIP
	Mfr.#: M74HCT374RM13TR OMO.#: OMO-M74HCT374RM13TR-STMICROELECTRONICS	IC FF D-TYPE SNGL 8BIT 20SOP
	Mfr.#: M74HCT367RM13TR OMO.#: OMO-M74HCT367RM13TR-STMICROELECTRONICS	Buffers & Line Drivers Hex Bus Buffe