AD600JR-REEL7

AD600JR-REEL7
Mfr. #:
AD600JR-REEL7
製造商:
Analog Devices Inc.
描述:
Special Purpose Amplifiers DUAL VARIABLE GAIN AMP IC
生命週期:
製造商新產品
數據表:
AD600JR-REEL7 數據表
交貨:
DHL FedEx Ups TNT EMS
支付:
T/T Paypal Visa MoneyGram Western Union
HTML Datasheet:
AD600JR-REEL7 DatasheetAD600JR-REEL7 Datasheet (P4-P6)AD600JR-REEL7 Datasheet (P7-P9)AD600JR-REEL7 Datasheet (P10-P12)AD600JR-REEL7 Datasheet (P13-P15)AD600JR-REEL7 Datasheet (P16-P18)AD600JR-REEL7 Datasheet (P19-P21)AD600JR-REEL7 Datasheet (P22-P24)AD600JR-REEL7 Datasheet (P25-P27)AD600JR-REEL7 Datasheet (P28-P30)AD600JR-REEL7 Datasheet (P31-P32)
ECAD Model:
更多信息:
AD600JR-REEL7 更多信息 AD600JR-REEL7 Product Details
產品屬性
屬性值
製造商:
模擬設備公司
產品分類:
專用放大器
RoHS:
N
系列:
AD600
放大器類型:
可變增益放大器
通道數:
2 Channel
英鎊 - 增益帶寬產品:
35 MHz
Ib - 輸入偏置電流:
1 uA
電源電壓 - 最大值:
5.25 V
電源電壓 - 最小值:
- 4.75 V
工作電源電流:
14 mA
最低工作溫度:
0 C
最高工作溫度:
+ 70 C
安裝方式:
貼片/貼片
包裝/案例:
SOIC-16
打包:
捲軸
高度:
2.35 mm
長度:
10.5 mm
供應類型:
雙重的
寬度:
7.6 mm
品牌:
模擬設備公司
雙電源電壓:
+/- 5 V
最大雙電源電壓:
+/- 5.25 V
最大輸入電阻:
102 Ohms at +/- 5 V
最小雙電源電壓:
+/- 4.75 V
工作電源電壓:
5 V
產品類別:
專用放大器
出廠包裝數量:
400
子類別:
放大器 IC
電壓增益分貝:
41.07 dB
單位重量:
0.023492 oz
Tags
AD600JR, AD600J, AD600, AD60, AD6
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***i-Key
IC OPAMP VGA 35MHZ 16SOIC
***i-Key Marketplace
IC VARIABLE GAIN 2 CIRC 16SOIC
***log Devices
The AD600/AD602 dual channel, low noise, variable gain amplifiers are optimized for use in ultrasound imaging systems, but are applicable to any application requiring precise gain, low noise and distortion, and wide bandwidth. Each independent channel provides a gain of 0 dB to +40 dB in the AD600 and -10 dB to +30 dB in the AD602. The lower gain of the AD602 results in an improved signal-to-noise ratio (SNR) at the output. However, both products have the same 1.4 nV/√Hz input noise spectral density. The decibel gain is directly proportional to the control voltage, accurately calibrated, and supply and temperature-stable. To achieve the difficult performance objectives, a proprietary circuit form, the X-AMP®, was developed. Each channel of the X-AMP comprises a variable attenuator of 0 dB to -42.14 dB followed by a high speed fixed gain amplifier. In this way, the amplifier never has to cope with large inputs, and can benefit from the use of negative feedback to precisely define the gain and dynamics. The attenuator is realized as a 7-stage R-2R ladder network having an input resistance of 100 W, laser trimmed to ±2%. The attenuation between tap points is 6.02 dB; the gain-control circuit provides continuous interpolation between these taps. The resulting control function is linear in dB. The gain-control interfaces are fully differential, providing an input resistance of ~15 M W and a scale factor of 32 dB/V (that is, 31.25 mV/dB) defined by an internal voltage reference. The response time of this interface is less than 1 µs. Each channel also has an independent gating facility that optionally blocks signal transmission and sets the dc output level to within a few millivolts of the output ground. The gating control input is TTL- and CMOS-compatible. The maximum gain of the AD600 is 41.07 dB, and the maximum gain of the AD602 is 31.07 dB; the -3 dB bandwidth of both models is nominally 35 MHz, essentially independent of the gain. The SNR for a 1 V rms output and a 1 MHz noise bandwidth is typically 76 dB for the AD600 and 86 dB for the AD602. The amplitude response is flat within ±0.5 dB from 100 kHz to 10 MHz; over this frequency range, the group delay varies by less than ±2 ns at all gain settings. Each amplifier channel can drive 100 W load impedances with low distortion. For example, the peak specified output is ±2.5 V minimum into a 500 W load, or ±1 V into a 100 W load. For a 200 W load in shunt with 5 pF, the total harmonic distortion for a ±1 V sinusoidal output at 10 MHz is typically -60 dBc. The AD600J/AD602J are specified for operation from 0°C to 70°C and are available in 16-lead PDIP (N) and 16-lead SOIC packages. The AD600A/AD602A are specified for operation from -40°C to +85°C and are available in 16-lead CERDIP (Q) and 16-lead SOIC packages. The AD600S/AD602S are specified for operation from -55°C to +125°C, are available in a 16-lead CERDIP (Q) package, and are MIL-STD-883 compliant. The AD600S/AD602S are also available under DESC SMD 5962-94572. AD600 - Gain Range: 0 dB to 40 dB AD602 - Gain Range: -10 dB to + 30 dB
型號 製造商 描述 庫存 價格
AD600JR-REEL7
DISTI # AD600JR-REEL7TR-ND
Analog Devices IncIC OPAMP VGA 35MHZ 16SOIC
RoHS: Not compliant
Min Qty: 400
Container: Tape & Reel (TR)
Limited Supply - Call
    AD600JR-REEL7
    DISTI # 584-AD600JR-R7
    Analog Devices IncSpecial Purpose Amplifiers DUAL VARIABLE GAIN AMP IC
    RoHS: Not compliant
    0
      AD600JR-REEL7Analog Devices IncAnalog Circuit, 1 Func, CMOS, PDSO16
      RoHS: Not Compliant
      750
      • 1000:$21.8300
      • 500:$22.9800
      • 100:$23.9200
      • 25:$24.9500
      • 1:$26.8700
      圖片 型號 描述
      AD600JRZ

      Mfr.#: AD600JRZ

      OMO.#: OMO-AD600JRZ

      Special Purpose Amplifiers DUAL VARIABLE GAIN AMP IC
      AD600JNZ

      Mfr.#: AD600JNZ

      OMO.#: OMO-AD600JNZ

      Special Purpose Amplifiers DUAL VARIABLE GAIN AMP IC
      AD600JRZ-RL

      Mfr.#: AD600JRZ-RL

      OMO.#: OMO-AD600JRZ-RL

      Special Purpose Amplifiers DUAL VARIABLE GAIN AMP IC
      AD600JR-REEL7

      Mfr.#: AD600JR-REEL7

      OMO.#: OMO-AD600JR-REEL7-ANALOG-DEVICES-INC-ADI

      Differential Amplifiers DUAL VARIABLE GAIN AMP IC
      AD600JRZ-R7

      Mfr.#: AD600JRZ-R7

      OMO.#: OMO-AD600JRZ-R7-ANALOG-DEVICES-INC-ADI

      Differential Amplifiers DUAL VARIABLE GAIN AMP IC
      AD600JN

      Mfr.#: AD600JN

      OMO.#: OMO-AD600JN-ANALOG-DEVICES

      IC OPAMP VGA 35MHZ 16DIP
      AD600JR-REEL

      Mfr.#: AD600JR-REEL

      OMO.#: OMO-AD600JR-REEL-ANALOG-DEVICES

      IC OPAMP VGA 35MHZ 16SOIC
      AD600JR/AR

      Mfr.#: AD600JR/AR

      OMO.#: OMO-AD600JR-AR-1190

      全新原裝
      AD600JRX

      Mfr.#: AD600JRX

      OMO.#: OMO-AD600JRX-1190

      全新原裝
      AD600JRX-AMP

      Mfr.#: AD600JRX-AMP

      OMO.#: OMO-AD600JRX-AMP-1190

      全新原裝
      可用性
      庫存:
      Available
      訂購:
      5500
      輸入數量:
      AD600JR-REEL7的當前價格僅供參考,如果您想獲得最優惠的價格,請提交查詢或直接發送電子郵件至我們的銷售團隊[email protected]
      從...開始
      最新產品
      • Interchangeable Negative Temperature Coefficient (
        Amphenol's interchangeable line of NTC chip thermistors are provided with a resin coating for good mechanical strength and resistance to solvents.
      • BoostLynx™ Boost Converters
        ABB Embedded Power's BoostLynx family of four products provide voltage step-up from an input voltage of 8 VDC to 16 VDC to an output voltage of 16 VDC to 34 VDC or 32 VDC to 54 VDC.
      • Compare AD600JR-REEL7
        AD600JR vs AD600JRREEL vs AD600JRREEL7
      • Mini D Ribbon (MDR) Cable Assembly
        3M™'s mini delta ribbon (MDR) high-speed transmission system assemblies, a digital interconnect system for high-performance data transmission applications.
      • Command™ Damage-Free Hanging Solutions
        The 3M™ Command™ product line holds strongly on a wide variety of surfaces, yet removes cleanly, offering a damage-free hanging solution for every project.
      • MDR Hand Tool Kit 3829
        3M™'s MDR is a complete portable tool kit 3829 contains tools needed for terminating cable to MDR (IDC) plug connectors.
      Top