OMO ElectronicOMO Electronic
Expand menu
您好，登錄我的帳戶
0 購物車

ADUCM310BBCZ-RL

ADUCM310BBCZ-RL
Mfr. #:
ADUCM310BBCZ-RL
製造商:
Analog Devices Inc.
描述:
ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
生命週期:
製造商新產品
數據表:
ADUCM310BBCZ-RL 數據表
交貨:
DHL FedEx Ups TNT EMS
支付:
T/T Paypal Visa MoneyGram Western Union
HTML Datasheet:
ADUCM310BBCZ-RL DatasheetADUCM310BBCZ-RL Datasheet (P4-P6)ADUCM310BBCZ-RL Datasheet (P7-P9)ADUCM310BBCZ-RL Datasheet (P10-P12)ADUCM310BBCZ-RL Datasheet (P13-P15)ADUCM310BBCZ-RL Datasheet (P16-P18)ADUCM310BBCZ-RL Datasheet (P19-P21)ADUCM310BBCZ-RL Datasheet (P22-P24)ADUCM310BBCZ-RL Datasheet (P25-P27)ADUCM310BBCZ-RL Datasheet (P28)
ECAD Model:
更多信息:
ADUCM310BBCZ-RL 更多信息 ADUCM310BBCZ-RL Product Details
產品屬性
屬性值
製造商：
模擬設備公司
產品分類：
ARM 微控制器 - MCU
RoHS：
Y
安裝方式：
貼片/貼片
包裝/案例：
BGA-112
系列：
ADUCM310
核：
ARM Cortex M3
數據總線寬度：
32 bit
最大時鐘頻率：
80 MHz
程序內存大小：
256 kB
數據內存大小：
32 kB
ADC分辨率：
14 bit
工作電源電壓：
3.3 V
最低工作溫度：
- 10 C
最高工作溫度：
+ 85 C
打包：
捲軸
產品：
單片機
程序存儲器類型：
閃光
品牌：
模擬設備公司
數據內存類型：
靜態隨機存取存儲器
接口類型：
I2C, SPI, UART
模擬電源電壓：
3.6 V
DAC分辨率：
12 bit
輸入/輸出電壓：
3.3 V
ADC 通道數：
22 Channel
定時器/計數器的數量：
3 Timer
處理器系列：
ADUCM310
產品類別：
ARM 微控制器 - MCU
出廠包裝數量：
2500
子類別：
微控制器 - MCU
電源電壓 - 最大值：
3.6 V
電源電壓 - 最小值：
2.9 V
看門狗定時器：
看門狗定時器
Tags
ADUCM31, ADUCM3, ADUCM, ADUC, ADU
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***et Europe
MCU 32-Bit ADuCM31x ARM Cortex M3 RISC 256KB Flash 2.5V/3.3V 112-Pin CSP-BGA T/R
***i-Key
IC MCU 32B 256KB FLASH 112CSPBGA
***ark
80Mhz M3 wi 14Bit Analog Ror TSRP+ (Rin), REEL
***log Devices
The ADuCM310 is a multidie stack, on-chip system designed for diagnostic control of tunable laser optical module applications. The ADuCM310 features a 16-bit (14-bit accurate) multichannel successive approximation register (SAR) ADC, an ARM Cortex™-M3 processor, eight voltage DACs (VDACs), six current output DACs, and Flash/EE memory packaged in a 6 mm × 6 mm, 112-ball CSP_BGA package. The bottom die in the stack supports the bulk of the low voltage analog circuitry and is the largest of the three die. It contains the ADC, VDACs, main IDAC circuits, as well as other analog support circuits, such as the low drift precision 2.5 V voltage reference source. The middle die in the stack supports the bulk of the digital circuitry, including the ARM Cortex-M3 processor, the flash and SRAM blocks, and all of the digital communication peripherals. In addition, this die provides the clock sources for the whole chip. A 16 MHz internal oscillator is the source of the internal PLL that outputs an 80 MHz system clock. The top die, which is the smallest die, was developed on a high voltage process, and this die supports the −5 V and +5 V VDAC outputs. It also implements the SOA IDAC current sink circuit that allows the external SOA diode to pull to a −3.0 V level to implement the fast shutdown of the laser output. Regarding the individual blocks, the ADC is capable of operating at conversion rates up to 800 kSPS. There are 10 external inputs to the ADC, which can be single ended or differential. Several internal channels are included, such as the supply monitor channels, an on-chip temperature sensor, and internal voltage reference monitors. The VDACs are 12-bit string DACs with output buffers capable of sourcing between 10 mA and 50 mA, and these DACs are all capable of driving 10 nF capacitive loads. The low drift current DACs have 14-bit resolution and varied full-scale output ranges from 0 mA to 20 mA to 0 mA to 250 mA on the SOA IDAC (IDAC3). The SOA IDAC also comes with a 0 mA to −80 mA current sink capability. A precision 2.5 V on-chip reference source is available. The internal ADC, IDACs, and VDAC circuits use this on-chip reference source to ensure low drift performance for all of these peripherals. The ADuCM310 also provides 2× buffered reference outputs capable of sourcing up to 1.2 mA. These outputs can be used externally to the chip. The ADuCM310 integrates an 80 MHz ARM Cortex-M3 processor. It is a 32-bit reduced instruction set computer (RISC) machine, offering up to 100 DMIPS peak performance. The ARM Cortex-M3 processor also has a flexible 14-channel direct memory access (DMA) controller supporting serial peripheral interface (SPI), UART, and I2C communication peripherals. The ADuCM310 has 256 kB of nonvolatile Flash/EE memory and 32 kB of SRAM integrated on-chip. A 16 MHz on-chip oscillator generates the 80 MHz system clock. This clock internally divides to allow the processor to operate at lower frequency, thus saving power. A low power internal 32 kHz oscillator is available and can clock the timers. The ADuCM310 includes three general-purpose timers, a wake-up timer (which can be used as a general-purpose timer), and a system watchdog timer. A range of communication peripherals can be configured as required in a specific application. These peripherals include UART, 2 × I2C, 2 × SPI, GPIO ports, and pulse-width modulation (PWM). On-chip factory firmware supports in-circuit serial download via the UART, while nonintrusive emulation and program download are supported via the serial wire debug port (SW-DP) interface. These features are supported on the EVAL-ADuCM310QSPZ development system. The ADuCM310 operates from 2.9 V to 3.6 V and is specified over a temperature range of −40°C to +85°C. Note that, throughout this data sheet, multifunction pins, such as P1.0/SIN/ECLKIN/PLAI[4], are referred to either by the entire pin name or by a single function of the pin, for example, P1.0, when only that function is relevant. For additional information on the ADuCM310, see the ADuCM310 reference manual, How to Set Up and Use the ADuCM310. APPLICATIONS Optical modules—tunable laser modules
Microcontrollers
Analog Devices Microcontroller Units (MCUs) can be used in a multitude of Internet of Things (IoT) processing applications. With built-in ADCs, DACs, and temperature sensors, the microcontrollers provide the analog and digital sensing functions that support interpreting capabilities in precision-sensing applications. Some of these MCUs can be powered by a single coin-cell battery with on-board power management, along with embedded memory and security features to help protect IP. These microcontrollers can be used in industrial, automotive, and instrumentation applications, as well as IoT applications such as Smart Agriculture, Smart Building, Smart City, Smart Factory, and Smart Health.
ADuCM310 Precision Analog MCUs
Analog Devices ADuCM310 Precision Analog Microcontrollers feature a 16-bit (14-bit accurate) multichannel successive approximation register (SAR) analog-to-digital converter (ADC), an ARM Cortex™-M3 processor, 8 voltage digital-to-analog converters (DACs), 6 current output DACs, and Flash/EE memory enclosed in a 6mm × 6mm, 112-ball CSP_BGA package. The ADC can operate at conversion rates up to 800kSPS. The device includes several internal channels, such as the supply monitor channels, an on-chip temperature sensor, and internal voltage reference monitors. The VDACs, which are 12-bit string DACs with output buffers capable of sourcing between 10mA and 50mA, are all capable of driving 10nF capacitive loads. The ADC, IDACs, and VDAC circuits use a precision 2.5V on-chip reference source to ensure low drift performance for all of the peripherals. The integrated 80MHz ARM Cortex-M3 processor has a 32-bit reduced instruction set computer (RISC) machine, providing up to 100DMIPS peak performance. The ARM Cortex-M3 processor also has a flexible 14-channel direct memory access (DMA) controller supporting serial peripheral interface (SPI), UART, and I²C communication peripherals. In addition, the ADuCM310 offers 256kB of nonvolatile Flash/EE memory and 32kB of SRAM integrated on-chip. The ADuCM310 precision analog microcontrollers are ideal for precision instrumentation, smart sensors, data acquisition systems, base station systems, transient capture systems, DAS & communications systems, wearable health monitoring devices, and optical networking.Learn More
Processors & DSP ADI SLP
型號 製造商 描述 庫存 價格
ADUCM310BBCZ-RL
DISTI # ADUCM310BBCZ-RL-ND		Analog Devices IncIC MCU 32BIT 256KB FLASH 112BGA
RoHS: Compliant
Min Qty: 2500
Container: Tape & Reel (TR)		Temporarily Out of Stock
  • 2500:$40.0119
ADUCM310BBCZ
DISTI # 584-ADUCM310BBCZ		Analog Devices IncARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
RoHS: Compliant		6
  • 1:$52.0500
  • 5:$50.4200
  • 10:$49.4500
  • 25:$47.2500
  • 50:$44.4700
  • 100:$43.1100
ADUCM310BBCZ-RL
DISTI # 584-ADUCM310BBCZ-RL		Analog Devices IncARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
RoHS: Compliant		0
  • 2500:$39.8400
ADUCM310BBCZ-RL
DISTI # ADUCM310BBCZ-RL		Analog Devices IncDIGITAL ISOLATOR
RoHS: Compliant		0
  • 2500:$42.5400
圖片 型號 描述
ADUCM310BBCZ

Mfr.#: ADUCM310BBCZ

OMO.#: OMO-ADUCM310BBCZ

 ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
ADUCM310BBCZ-RL

Mfr.#: ADUCM310BBCZ-RL

OMO.#: OMO-ADUCM310BBCZ-RL

 ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
ADUCM310BBCZ

Mfr.#: ADUCM310BBCZ

OMO.#: OMO-ADUCM310BBCZ-ANALOG-DEVICES

 IC MCU 32BIT 256KB FLASH 112BGA ADuCM
ADUCM310BBCZ-RL

Mfr.#: ADUCM310BBCZ-RL

OMO.#: OMO-ADUCM310BBCZ-RL-ANALOG-DEVICES

 IC MCU 32BIT 256KB FLASH 112BGA ADuCM
ADUCM310BBCZADI

Mfr.#: ADUCM310BBCZADI

OMO.#: OMO-ADUCM310BBCZADI-1190

 全新原裝
可用性
庫存:
Available
訂購:
1000
輸入數量:
ADUCM310BBCZ-RL的當前價格僅供參考，如果您想獲得最優惠的價格，請提交查詢或直接發送電子郵件至我們的銷售團隊[email protected]
從...開始
最新產品
More Newest Products
Top