5962-9457201MEA

Mfr. #:: 5962-9457201MEA
製造商:: Analog Devices Inc.
描述:: Special Purpose Amplifiers VARIABLE GAIN AMP IC
生命週期:: 製造商新產品
數據表:: 5962-9457201MEA 數據表
交貨:: DHL FedEx Ups TNT EMS
支付:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:
更多信息:: 5962-9457201MEA 更多信息 5962-9457201MEA Product Details

產品屬性
屬性值

製造商：: 模擬設備公司

產品分類：: 專用放大器

RoHS：: N

系列：: AD600

放大器類型：: 可變增益放大器

通道數：: 2 Channel

英鎊 - 增益帶寬產品：: 35 MHz

電源電壓 - 最大值：: 5.25 V

電源電壓 - 最小值：: - 4.75 V

工作電源電流：: 14 mA

最低工作溫度：: - 55 C

最高工作溫度：: + 125 C

安裝方式：: 通孔

包裝/案例：: CDIP-16

打包：: 管子

高度：: 3.56 mm

長度：: 21.34 mm

供應類型：: 雙重的

寬度：: 7.87 mm

品牌：: 模擬設備公司

雙電源電壓：: +/- 5 V

最大雙電源電壓：: +/- 5.25 V

最大輸入電阻：: 105 Ohms at +/- 5 V

最小雙電源電壓：: +/- 4.75 V

工作電源電壓：: 5 V

產品類別：: 專用放大器

出廠包裝數量：: 25

子類別：: 放大器 IC

電壓增益分貝：: 40 dB

Tags: 5962-94572, 5962-9457, 5962-945, 5962-94, 5962-9, 5962, 596

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

5962-9457201MEA 描述

***ical: SP Amp Variable Gain Amp Dual ±5.25V 16-Pin CDIP Tube

***C: SP Amp Variable Gain Amp Dual A5.25V 16-Pin CDIP

***i-Key: IC OPAMP VGA 2 CIRCUIT 16SO

***et: VARIABLE GAIN AMP IC

***log Devices: The AD600/AD602 dual channel, low noise, variable gain amplifiers are optimized for use in ultrasound imaging systems, but are applicable to any application requiring precise gain, low noise and distortion, and wide bandwidth. Each independent channel provides a gain of 0 dB to +40 dB in the AD600 and -10 dB to +30 dB in the AD602. The lower gain of the AD602 results in an improved signal-to-noise ratio (SNR) at the output. However, both products have the same 1.4 nV/vHz input noise spectral density. The decibel gain is directly proportional to the control voltage, accurately calibrated, and supply and temperature-stable. To achieve the difficult performance objectives, a proprietary circuit form, the X-AMP®, was developed. Each channel of the X-AMP comprises a variable attenuator of 0 dB to -42.14 dB followed by a high speed fixed gain amplifier. In this way, the amplifier never has to cope with large inputs, and can benefit from the use of negative feedback to precisely define the gain and dynamics. The attenuator is realized as a 7-stage R-2R ladder network having an input resistance of 100 W, laser trimmed to ±2%. The attenuation between tap points is 6.02 dB; the gain-control circuit provides continuous interpolation between these taps. The resulting control function is linear in dB. The gain-control interfaces are fully differential, providing an input resistance of ~15 M W and a scale factor of 32 dB/V (that is, 31.25 mV/dB) defined by an internal voltage reference. The response time of this interface is less than 1 µs. Each channel also has an independent gating facility that optionally blocks signal transmission and sets the dc output level to within a few millivolts of the output ground. The gating control input is TTL- and CMOS-compatible. The maximum gain of the AD600 is 41.07 dB, and the maximum gain of the AD602 is 31.07 dB; the -3 dB bandwidth of both models is nominally 35 MHz, essentially independent of the gain. The SNR for a 1 V rms output and a 1 MHz noise bandwidth is typically 76 dB for the AD600 and 86 dB for the AD602. The amplitude response is flat within ±0.5 dB from 100 kHz to 10 MHz; over this frequency range, the group delay varies by less than ±2 ns at all gain settings. Each amplifier channel can drive 100 W load impedances with low distortion. For example, the peak specified output is ±2.5 V minimum into a 500 W load, or ±1 V into a 100 W load. For a 200 W load in shunt with 5 pF, the total harmonic distortion for a ±1 V sinusoidal output at 10 MHz is typically -60 dBc. The AD600J/AD602J are specified for operation from 0°C to 70°C and are available in 16-lead PDIP (N) and 16-lead SOIC packages. The AD600A/AD602A are specified for operation from -40°C to +85°C and are available in 16-lead CERDIP (Q) and 16-lead SOIC packages. The AD600S/AD602S are specified for operation from -55°C to +125°C, are available in a 16-lead CERDIP (Q) package, and are MIL-STD-883 compliant. The AD600S/AD602S are also available under DESC SMD 5962-94572. AD600 - Gain Range: 0 dB to 40 dB AD602 - Gain Range: -10 dB to + 30 dB

5962-9457201MEA 更多信息

Amplifiers ADI SLP

Amplifier ICs: Analog Devices Amplifier ICs focus on amplifiers that deliver high performance and high value. ADI combines circuit design, manufacturing process innovation, and applications expertise to create products that simplify the signal-conditioning design.

Market price

型號	製造商	描述	庫存	價格
5962-9457201MEA DISTI # 26641923	Analog Devices Inc	SP Amp Variable Gain Amp Dual ±5.25V 16-Pin CDIP Tube RoHS: Not compliant	25	25:$109.8600
5962-9457201MEA DISTI # 5962-9457201MEA-ND	Analog Devices Inc	IC AMP VGA DUAL LN 50MA 16CERDIP RoHS: Not compliant Min Qty: 1 Container: Tube	Temporarily Out of Stock	1:$109.8600
5962-9457201MEA	Analog Devices Inc	Analog Circuit, 1 Func, CMOS, CDIP16 RoHS: Not Compliant	1361	1000:$122.3700 500:$128.8100 100:$134.1000 25:$139.8500 1:$150.6100
5962-9457201MEA DISTI # 584-5962-9457201MEA	Analog Devices Inc	Special Purpose Amplifiers VARIABLE GAIN AMP IC RoHS: Not compliant	0	1:$108.4400 5:$105.2500 10:$102.0700 25:$98.8800 50:$93.7600

相關產品

圖片	型號	描述
	Mfr.#: 5962-9474301MXA OMO.#: OMO-5962-9474301MXA	Analog to Digital Converters - ADC IC 16-BIT SAMPLING
	Mfr.#: 5962-9450901QKA OMO.#: OMO-5962-9450901QKA-1190	Buffer/Line Driver 10-CH Non-Inverting 3-ST BiCMOS 24-Pin CFPAK Tube - Rail/Tube (Alt: 5962-9450901QKA)
	Mfr.#: 5962-9451003MXA OMO.#: OMO-5962-9451003MXA-1190	全新原裝
	Mfr.#: 5962-9454901MXA OMO.#: OMO-5962-9454901MXA-1190	全新原裝
	Mfr.#: 5962-9455501M3A OMO.#: OMO-5962-9455501M3A-433	Soft Sw PWM Cntrlr 4-OUT PH SHIFT RES 1MHz 28-Pin LCCC Tube - Rail/Tube (Alt: 5962-9455501M3A)
	Mfr.#: 5962-9455701QXA OMO.#: OMO-5962-9455701QXA-1190	全新原裝
	Mfr.#: 5962-9461601QXA SNJ54A OMO.#: OMO-5962-9461601QXA-SNJ54A-1190	全新原裝
	Mfr.#: 5962-9469203QPA OMO.#: OMO-5962-9469203QPA-1190	OP Amp Dual GP R-R O/P ±8V/16V 8-Pin CDIP Tube (Alt: 5962-9469203QPA)
	Mfr.#: 5962-9469701QRA OMO.#: OMO-5962-9469701QRA-1190	Buffer/Line Driver 8-CH Inverting 3-ST BiCMOS 20-Pin CDIP Tube - Rail/Tube (Alt: 5962-9469701QRA)
	Mfr.#: 5962-9472502M2X OMO.#: OMO-5962-9472502M2X-1190	全新原裝