XP Power's DTE series, highly efficient converters, with model-dependent typical efficiency in the range of 89% to 92%, run cooler and consume less power compared to other less efficient converters available in the market. The 20 W, DTE20 model measures 96 mm x 54 mm x 23.3 mm, the 40 W, DTE40 are just 112 mm x 63.8 mm x 25.6 mm, and the 60 W, DTE60 model measures 112 mm x 67.8 mm x 38 mm. Two ultra-wide, 4:1 input voltage range options are based around nominal 24 V_DC (9 V_DC min. to 36 V_DC max. ) and 48 V_DC (18 V_DC min. to 75 V_DC max.). Tightly regulated single output voltage options of 5.1 V_DC, 12 V_DC, 24 V_DC, or 48 V_DC are available across the range and isolation is rated at 2500 V_DC for 60 seconds.

The DTE series can accommodate a wide range of operating temperatures across the extended industrial range from -40°C to 85°C. Full power is available up to a minimum of +70° depending on the model. Compliance to the international safety specification for IT equipment UL/IEC 60950-1 is standard across the range and they all meet the EN55022 class A limits for both conducted and radiated emissions without the need for any external filtering components.

Protection features such as short-circuit, output-overload, input under-voltage lock-out and output over-voltage protections along with a remote on/off capability are standard across the range. Front-mounted input and output screw terminal connections provide ease-of-installation. These converters are available in either a chassis-mount or a DIN rail format.