The SCS Iron Man Plus workstation monitors a voltage level that is being generated on a printed circuit board while working on it. It also monitors resistance, to ground a conductive or dissipative static-control type of work surface. The Iron Man Plus is compatible with a dual-conductor wrist strap and can monitor resistance and voltage when the wrist strap is being worn properly.
Features |
|
|
- Single workstation continuous monitor
- Continuously monitors the path-to-ground integrity of an operator and conductive or dissipative work surface, and meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
- Electrical overstress (EOS) detection
- Alarms if over-voltage (±5 V or less), from a tool such as a soldering iron or electric screwdriver, is applied to a circuit board under assembly
- Operator body-voltage detection
- Alarms if the operator generates or comes in contact with a voltage that would be dangerous to an ESD susceptible item
- Digital signal processing technology
- Applies a low test voltage to the operator (0.40 V) for the handling of sensitive components
- 100 VAC to 240 VAC power adapter with interchangeable plugs
- Works with standard electrical systems in North America, United Kingdom, Japan, Asia, and Europe
- Assembled in the United States of America with globally sourced materials
|
|
- Miniature size (0.85” H x 2.4” W x 2.6” L)
- Uses minimal workspace and includes mounting tabs for installation underneath table tops
- Use with dual-wire wrist straps
- See SCS dual-wire wrist straps
- Replaceable dual-wire operator jack
- Use the CTA251 replacement jack PCB to easily replace the operator jack without the use of solder
- Calibration unit available for accurate performance and conformity testing in the field
- NIST calibrated with certificate included
- Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology
- For more information on the calibration of SCS products, see calibration
|