Phyton's CPI2-B1-ACM is an in-system programmer for Arm® Cortex®-M microcontrollers, memory devices, and MCUs from other manufacturers.
By Phyton Inc 1228
Phyton’s CPI2-B1-MSP430 in-system programmer for Texas Instruments MSP430 microcontrollers, memory devices, and MCUs from other manufacturers.
By Phyton Inc 970
LoFive is a lightweight SiFive Freedom E310 open source SoC evaluation kit from GroupGets which utilizes RISC-V.
By GroupGets 1180
Phyton's CPI2-B1-SL51 in-system programmer supports Silicon Labs microcontrollers, memory devices, and MCUs from other manufacturers.
By Phyton Inc 1041
Phyton's CPI2-B1-REU in-system programmer supports Renesas microcontrollers, memory devices, and MCUs from other manufacturers.
By Phyton Inc 1112
Microchip’s DV330101 LVPFC development kit offers safe voltage levels at moderate power while designing algorithms on a boost power factor correction topology.
By Microchip Technology 969
MPS’ MP26xx chargers use input power from either an AC adapter or a USB port to supply the system load and charge the battery independently.
By Monolithic Power Systems 727
Digilent’s ZedBoard™ Zynq®-7000 Arm®/FPGA is a low-cost development board for the Xilinx Zynq-7000 all programmable SoC (AP SoC).
By Digilent, Inc. 795
Silicon Labs' EFM8BB1 low-cost kit with integrated debugger and USB connection is an easy to use yet powerful evaluation tool and development starting point.
By Silicon Labs 1644
Digilent’s FMC Pcam adapter is a cost-effective way to add cameras to FPGA or APSoC development boards with the high-speed, FMC connector.
By Digilent, Inc. 997
STMicro’s X-NUCLEO-OUT02A1 industrial digital output expansion board is based on the ISO8200AQ galvanic isolated octal high-side smart power solid state relay.
By STMicroelectronics 961
Texas Instruments' CC2530 is a complete 2.4 GHz RF system-on-chip solution supporting IEEE 802.15.4 and an extensive set of applications.
By Texas Instruments 1438
Texas Instruments' PurePath™ Wireless 2.4 GHz RF SoC for wireless digital audio streaming
By Texas Instruments 1720
Texas Instruments' CC11x is a complete design that reduces component count and offers low power and a longer battery lifetime.
By Texas Instruments 1448
CC2533 decrease bill of material costs for single-chip remote controls in low-duty-cycle systems with low power consumption.
By Texas Instruments 1170
Incorporating DLP Design’s DLP-RFID2 RFID module allows the software application developer to get familiar with the functionalities of the TRF7970A RFID/NFC IC.
By DLP Design, Inc. 943
Nordic Semiconductor's nRF52 Preview Development Kit is a stand-alone development board for Bluetooth Smart, ANT, or 2.4 GHz proprietary applications.
By Nordic Semiconductor 1572
Cypress Semiconductor's CY5670 CySmart USB dongle is used with the CySmart BLE Test and Debug Tool (Windows® PC) to emulate a BLE host the computer.
By Cypress Semiconductor Corp 936
Cypress Semiconductor’s CY5671 PRoC BLE Module features a PRoC BLE device, two crystals for the antenna matching network, a PCB antenna, and other passives.
By Cypress Semiconductor Corp 1034
Cypress Semiconductor's CY8CKIT-142 module features a PSoC 4 BLE device, two crystals for the antenna matching network, a PCB antenna, and other passives.
By Cypress Semiconductor Corp 1058