3M™'s 9707 electrically conductive adhesive transfer tape is a pressure sensitive adhesive transfer tape with isotropic electrical conductivity.
By 3M 90
3M™'s RPxx and RPxx(F) series VHB tapes are double-sided pressure sensitive adhesive tapes for bonding a variety of substrates.
By 3M 125
DFRobot offers the OverLord series fused deposition modeling (FDM) printers allowing rapid prototyping of custom physical elements.
By DFRobot 171
3M™'s TC-2810 is a thermally conductive 2-part epoxy using boron nitride (BN) filler for good thermal conductivity with high adhesion.
By 3M 195
3M™ tape 9713 is ideal for assembly of an EMI cage to a printed circuit board, often required in telecommunications equipment.
By 3M 122
Flambeau's A-Series boxe's styrene material gives these boxes an extremely high clarity for viewing the contents inside.
By Flambeau, Inc. 182
Davies Molding's hex hybrid standoffs are durable and versatile insulator standoff spacers available with multiple combinations of female and male inserts, hex widths, and spacing lengths.
By Davies Molding, LLC. 132
Bud Industries' AN-A series die-cast aluminum waterproof enclosures are ideal for housing sensitive electronic assemblies and is designed to IP68.
By Bud Industries 130
Memory Protection Devices' CR1225 battery holder with snap-on cover with both through-hole and surface-mount versions available.
By MPD (Memory Protection Devices) 59
Delta’s core product knowledge from decades of magnetic, electromechanical and fluid design has resulted in this line of DSP series solenoid pumps.
By Delta Electronics EMI 85
Rose+Krieger's RK Frameworks aluminum profile systems free the user from machines and equipment, which is what their variety of different profile sizes were designed for.
By Rose+Krieger 68
Digilent's high-speed adapter, for the DIN_USR connector on the Digital Discovery, is an alternative to the 2 x 16 flywire assembly.
By Digilent, Inc. 67
Klein Tools’ cable skinning knife offers the time saving benefit of a replaceable blade. After a long session of cable skinning the blade can just be replaced with the exclusively designed cable s
By Klein Tools, Inc. 100
Chip Quik’s conductive paint can be applied by dot dispensing, line dispensing, stencil and squeegee, or with a paint brush.
By Chip Quik Inc 528
Essentra's polypropylene standard-locking cable ties have a built-in lock system and are ideal for electrical applications.
By Essentra Components 67
3M™ Super 77 multipurpose spray adhesive is an extremely versatile, fast-drying spray adhesive that bonds a wide range of lightweight materials.
By 3M 193
MPD's BA2032SM and PC PIN BA2032 battery holders are made from a glass-filled Nylon 66 that has a temperature range of -40°C to +225°C.
By MPD (Memory Protection Devices) 82
Klein Tools' Slide Drive, Tip-Ident drivers with a unique, patented tip that slides back and forth from 1/4” to 5/16” and comes in a variety of lengths.
By Klein Tools, Inc. 85
Kester 275 Flux for cored solder wire was developed to provide superior wetting performance for hand soldering in the electronics industry.
By Kester Solder 105
Davies Molding soft touch control knobs available a in variety of sizes, styles, materials, and color combinations. The soft touch control knobs are molded with a soft over-molded thermoplastic el
By Davies Molding, LLC. 140