RAFI's extremely compact, Lumotast 22 emergency stop push buttons feature a low mounting depth of 27 mm and are designed for a mounting hole diameter of 22.3 mm.
By RAFI 1099
RAFI's RAFIX 22+ FS rugged USB feedthrough adapters use a 22.3 mm mounting hole diameter that matches the RAFIX 22 FS and RAFIX 22 QR actuator series.
By RAFI 1121
RAFI's RAFIX 22 FS+ control component generation provides designers with a basis for designs plus fast and cost-efficient installation options requiring a minimum amount of space.
By RAFI 1121
MICON 5 tactile switches, by RAFI, offer a high level of switching reliability while requiring a minimum amount of space and are offered with SMT and THT connection types.
By RAFI 1161
RAFI is providing a very compact solution to ensure operational functions with the keyswitch from the RAFIX 22 FS+ control component series.
By RAFI 1217
InvenSense's ICS-43434 is a digital I²S output bottom port microphone. The complete ICS-43434 solution consists of a MEMS sensor signal conditioning an analog-to-digital converter decim
By TDK InvenSense 1235
InvenSense's ICS-40618 is a bottom port microphone with a differential analog output. This microphone can capture a very wide dynamic range with very low power consumption.
By TDK InvenSense 1020
Omron's G7L-X compact power relay is capable of switching 1,000 VDC and complies with solar inverter safety standards (UL and EN).
By Omron Electronics Inc-EMC Div 918
E-Switch's PV6 RGB series anti-vandal pushbutton switches now offer RGB LED illumination for vending machines, ticket kiosks, and other equipment/machine applications that require a tamper res
By E-Switch 665
E-Switch's PV4 series anti-vandal switch offers an RGB feature, long life, and IP65 ratings for kiosk applications, ticket dispensers, and industrial-type applications.
By E-Switch 1098
NKK Switches presents the HB series of subminiature pushbuttons featuring compact and contemporary design, which makes them the preferred choice for a cutting edge appeal on front panel designs.
By NKK Switches 1768
Brushless DC motors incorporating CANopen technology allow users to network several motors, and they are now available from Crouzet.
By Crouzet Controls 1647
DC brushless motors from Crouzet are designed with an integrated control unit for motion control, position, speed, and torque.
By Crouzet Controls 1746
The MFS and MHS product lines are two of Nidec Copal Electronics' logic level, ultra-miniature, low profile slide switch offerings.
By Nidec Copal Electronics 807
Tymphany's D series tweeters are designed with a variety of diaphragm materials: silk (D, DX), aluminum (DA), and titanium (DQ).
By Peerless by Tymphany 1135
Over 80 years of Peerless heritage is exemplified in the PLS series. The series has been designed for low distortion at low frequency, extended high frequency response, and advanced motor cooling.
By Peerless by Tymphany 1278
The SLS family from Tymphany is built upon the foundation of the SDS line, but engineered for higher performance.
By Peerless by Tymphany 1200
Tymphany's full-range drivers are optimized for big sound from a small footprint with a spiderless suspension system and large excursion.
By Peerless by Tymphany 1274
TC series full-range drivers from Tymphany come in many sizes, aspect ratios, and magnet types to address multiple performance levels and price points.
By Peerless by Tymphany 1318
InvenSense's ICS-52000 bottom-port microphone with digital TDM interface allows up to 16 of the ICS-52000 microphones to connect directly to digital processors.
By TDK InvenSense 1129