The Optoelectronics group of Vishay today introduced their high-sensitivity proximity and ambient light sensor with long-distance proximity detection to 1 m.
By Vishay Semiconductor / Opto Division 1299
The L-series from Magnasphere offers remarkable ferrous-metal proximity sensing. Unlike typical reed switch devices, they need no magnet actuator.
By Magnasphere Corp 1330
TI's OPT3002 light-to-digital sensor is designed for applications that include intrusion and door-open detection systems and system wake-up circuits.
By Texas Instruments 895
Bosch's BME280 is an integrated environmental sensor developed specifically for mobile applications where size and low-power consumption are key design constraints.
By Bosch Sensortec 1229
Analog Devices’ ADUX1020 is a highly-efficient photometric sensor with an integrated 14-bit analog-to-digital converter (ADC) and a 20-bit burst accumulator that works in concert with a flexible l
By Analog Devices Inc 1139
Sensirion's SHT3x-series membrane is an ePTFE type of foil, dedicated to protect the sensor opening from water and dust, according to IP67.
By Sensirion 1460
U.S. Sensor/Littelfuse’s DO-35 glass encapsulated thermistors are hermetically sealed devices capable of withstanding temperatures up to 300°C.
By Littelfuse Inc 1466
Lite-On’s light sensor is used to measure the ambient light level in the environment as perceived by the human eye.
By Lite-On, Inc. 2095
TE Connectivity Measurement Specialties’ MS5525DSO is a digital small outline pressure sensor from MEAS with SPI and I2C bus interface designed for high volume OEM users.
By TE Connectivity Measurement Specialties Inc. 947
BEI Sensors' encoder signal broadcasters accept signals of 5, 12-15, and 24 VDC and provide three output options: VOUT = VIN, VOUT = 5 V, or NPN open collector.
By Sensata Technologies – BEI Sensors 1296
BEI Sensors’ optical isolator modules provide a robust output to receiving electronics, helping eliminate ground loops and reduce signal degradation.
By Sensata Technologies – BEI Sensors 1398
BEI Sensors' H25 incremental and absolute optical encoders are designed for extreme environments: wet, dirty/dusty, ext. temp, and high shaft load.
By Sensata Technologies – BEI Sensors 1191
Sensirion introduces their SDP3x differential pressure and mass flow sensors that are designed for high-volume applications where size is a key requirement.
By Sensirion 1140
Omron's D7S seismic sensors are earthquake detection sensors with high detection precision and low electricity consumption through 3-axis acceleration sensors.
By Omron Electronics Inc-EMC Div 1275
NVE Corporation's ADT001 and ADT002 rotation sensors are ultra-low power, digital-output, magnetic-rotation sensors.
By NVE Corp/Isolation Products 1071
Sensirion's STS3x temperature sensors are fully calibrated in a highly reliable DFN package for long-term stability that allows for integration into a great variety of applications.
By Sensirion 1399
The HG4930 is a micro-electro-mechanical system (MEMS) based inertial measurement unit (IMU) designed by Honeywell to meet the needs of a range of applications across various markets.
By Honeywell Aerospace 1314
Allegro's APS12205 and APS12215 Hall effect sensor ICs are AEC-Q100 qualified for operation from 2.8 V to 5.5 V.
By Allegro MicroSystems, LLC 733
Infineon's DPS310XTSA1 is a miniaturized digital barometric air pressure sensor with high accuracy, high stability, and low current consumption.
By Infineon Technologies 1485
TI's HDC1010 offers a sensing element placed on the bottom part of the device which makes it robust against dirt, dust, and other environmental contaminants.
By Texas Instruments 868