FTDI's UMFT201XA USB-to-I²C interface includes a battery charger detection feature that allows batteries to be charged with a higher current.
By FTDI, Future Technology Devices International Ltd 166
ON Semiconductor's large USB type C portfolio offers designers a small footprint, low power, and flexible design options.
By ON Semiconductor 131
ADI introduces a FET input AFE with an integrated ADC driver designed to interface directly with current mode sensors.
By Analog Devices Inc 71
THine LVDS products provide a 1.8 V low power consumption, support a maximum 30 bit color, and a swing mode to reduce EMI emissions
By CEL California Eastern Labs 74
Lattice Semiconductor offers its line of USB Type-C connectors featuring a small reversible connector, two channels of 10 Gbps USB data, flexible alternate modes for transporting non USB data such
By Lattice Semiconductor Corporation 55
Toshiba's TLP383 optocouplers features a faster switching speed than standard phototransistor couplers.
By Toshiba Semiconductor and Storage 120
AKM's AK4137 supports both master/slave mode of IIS, TDM and DSD data format.
By AKM Semiconductor Inc 79
Enabling faster and higher volume data transfers than ever before, the FT60x is the first SuperSpeed USB 3.0 series from FTDI Chip that offers USB access to a wider range of data intensive imaging
By FTDI, Future Technology Devices International Ltd 123
Texas Instruments' TUSB320 enables USB Type-C ports with the configuration channel (CC) logic needed for Type-C ecosystems.
By Texas Instruments 51
Exar's XR32430 is a 3-driver/5-receiver RS-232 transceivers in small 5 x 5 mm QFN packages.
By MaxLinear 121
Texas Instruments’ HD3SS3212 is a bidirectional passive switch in mux or demux configurations that can work for any high-speed interface applications.
By Texas Instruments 67
Texas Instruments' TUSB211 USB high-speed (HS) signal conditioner, is compatible with USB 2.0, OTG 2.0, and BC 1.2 and qualified for automotive applications.
By Texas Instruments 57
CEL’s THine LVDS products provide a 3.3 V low power CMOS design, support pixel data transmission, and achieve lower EMI.
By CEL California Eastern Labs 70
Maxim's MAX14890E incremental encoder receiver contains four differential receivers and two single-ended receivers.
By Maxim Integrated 135
Maxim’s DS28E17 is a 1-wire slave to I²C master bridge device that interfaces directly to I²C slaves at standard (100 kHz max) or fast (400 kHz max).
By Maxim Integrated 60
Maxim's MAX44211 is a low-distortion line driver customized for PLC applications where high output current is needed to drive the isolation / coupling transformer.
By Maxim Integrated 86
Texas Instruments' TPS25810 is a USB Type-C downstream facing port (DFP) controller with an integrated 3 A rated USB power switch with load detection.
By Texas Instruments 65
Exar offers the XR33202, RS-485/RS-422, high-performance transceiver with wide 3.0 V to 5.5 V supply operation, 1.65 V-5.5 V I/O interface in a 3 mm x 3 mm, 10-pin, DFN package.
By MaxLinear 112
Texas Instruments' TUSB4020BI is a two-port, high-speed, 480 Mbps, USB 2.0 hubs that support per port or ganged power switching and over-current protection.
By Texas Instruments 54
VersaLogic’s VL-MPEe-FW1 1394 FireWire module supports one FireWire 800 (1394b) and one FireWire 400 (1394a) channel operating at extended temperature.
By VersaLogic Corporation 75